6S45P-E
General
Triode for HF amplifying in wide frequency amplifiers.
Envelope: glass.
Mass 20 g.
Lead diagram
General characteristics:
| Filament voltage, Volt | 6.3 |
| Anode voltage, Volt | 150 |
| Grid voltage, Volt | 9 |
| Resistance in cathode circuit, Ohm | 30 |
| Filament (heater) current, mA | 440±30 |
| Anode current, mA | 40±12 |
| Reverse grid current, mkA | £0,3 |
| Mutual conductance, mA/V | 45 |
| Gain coefficient | 52±16 |
| Input resistance (by f=60 MHz), KOhm | 3.5 |
| Equivalent noise resistance, KOhm | 0.1 |
| Vibration noise (by RA=2 KOhm), mV | £150 |
| Inter electrode capacitance, pF:
input |
11±2 |
| output | 1.9±0.3 |
| transfer | 4-5 |
| Operation time, h | ³3000 |
Limited operating values:
| Filament voltage, V | 6-6.6 |
| Anode voltage, V | 150 |
| Cathode - heater voltage, V | 100 |
| Cathode current, mA | 52 |
| Anode dissipation, W | 7.8 |
| Resistance in grid circuit, MOhm | 0.15 |
Operating environmental conditions :
| Acceleration of vibration loads, g | 6 |
| by frequencies, Hz | 5-600 |
| Acceleration of multiple impacts, g | 75 |
| Acceleration of single impact, g | 500 |
| Continues acceleration, g | 100 |
| Ambient temperature, °Ñ | -60 to +85 |
| Relative humidity at up to 40°C, % | 98 |
Plate-grid and plate curves
