**6S41S6C41C**

**General**

Triodes, used as an regulator in electronic stabilizer circuits.

Envelope: glass.

Mass 100 g.

**Lead diagram**

**General characteristics:**

Filament voltage, Volt | 6.3 |

Anode voltage, Volt | 90 |

Resistance in cathode circuit, Ohm | 40 |

Filament (heater) current, A | 2.8 |

Anode current, mA | 240 |

Reverse grid current, mkA | £5 |

Dissipate cathode-heater current, mkA | £100 |

Mutual conductance, mA/V | 19 |

Interior resistance, Ohm | 150 |

Vibration noise (by R_{A}=2 KOhm), mV |
£300 |

Inter electrode capacitance, pF:
input |
11±6 |

output | 6±3 |

transfer | 15±5 |

Operation time, h | ³1250 |

**Limited operating values:**

Filament voltage, V | 5,7-6.9 |

Anode voltage, V | 450 |

Grid voltage, V | -0.5- -250 |

Cathode - heater voltage, V | 300 |

Anode current, mA | 310 |

Anode dissipation, W | 25 |

Resistance in grid circuit, MOhm | 0.2 |

**Operating environmental conditions :**

Acceleration of vibration loads, g | 6 |

by frequencies, Hz | 5-600 |

Acceleration of multiple impacts, g | 12 |

Acceleration of single impact, g | 300 |

Continuos acceleration, g | 50 |

Ambient temperature, °Ñ | -60 to +70 |

Relative humidity at up to 40°C, % | 98 |

**Plate-grid and plate curves**