**6S45P-E**

General

Triode for HF amplifying in wide frequency amplifiers.

Envelope: glass.

Mass 20 g.

**Lead diagram**

**General characteristics:**

Filament voltage, Volt | 6.3 |

Anode voltage, Volt | 150 |

Grid voltage, Volt | 9 |

Resistance in cathode circuit, Ohm | 30 |

Filament (heater) current, mA | 440±30 |

Anode current, mA | 40±12 |

Reverse grid current, mkA | £0,3 |

Mutual conductance, mA/V | 45 |

Gain coefficient | 52±16 |

Input resistance (by f=60 MHz), KOhm | 3.5 |

Equivalent noise resistance, KOhm | 0.1 |

Vibration noise (by R_{A}=2 KOhm), mV |
£150 |

Inter electrode capacitance, pF:
input |
11±2 |

output | 1.9±0.3 |

transfer | 4-5 |

Operation time, h | ³3000 |

**Limited operating values:**

Filament voltage, V | 6-6.6 |

Anode voltage, V | 150 |

Cathode - heater voltage, V | 100 |

Cathode current, mA | 52 |

Anode dissipation, W | 7.8 |

Resistance in grid circuit, MOhm | 0.15 |

**Operating environmental conditions :**

Acceleration of vibration loads, g | 6 |

by frequencies, Hz | 5-600 |

Acceleration of multiple impacts, g | 75 |

Acceleration of single impact, g | 500 |

Continues acceleration, g | 100 |

Ambient temperature, °Ñ | -60 to +85 |

Relative humidity at up to 40°C, % | 98 |

**Plate-grid and plate curves**