STC NavigatoR / High-Voltage High-Vacuum Rectifier Tubes / Tube v1-0,15/55

,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,High-Voltage High-Vacuum Rectifier Tubes,High-Voltage,High-Vacuum,Rectifier,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">

V1-0,15/55

RECTIFIER TUBE

The V1-0,15/55 rectifier tube is used in rectifier circuits of RF equipment

GENERAL
Cathode: directly heated, carbonized thoriated tungsten.
Envelope: glass.
Height: at most 135 mm.
Diameter: at most 65 mm.
Mass: at most 170 g

v1-0,15[55(1)00051.jpg

OPERATING ENVIRONMENTAL CONDITIONS

Vibration loads:

frequencies, Hz 5-600

acceleration, m/s² 75

Multiple impacts at impact duration up to 80 ms
with acceleration, m/s² 735

Ambient temperature, °C -60 to +100

Relative humidity at up to +40 °C, % 98

BASIC DATA
Electrical Parameters

Filament voltage, V 6.3

Filament current, A 6.8-8.2

Anode current (at anode voltage 250 V), mA, at least 180

Peak emission current (at filament voltage 5.7 V, anode voltage 2 kV), mA, at least 700

Electrical parameters over 500 h of service:

peak emission current, mA, at least 700

anode current, mA, at least 150

Limit Operating Values

Filament voltage, V 5.7-6.9

Reverse voltage, kV:

at anode average current 150 mA 40

at anode average current 50 mA 50

Anode current, peak value, mA 700

Anode dissipation, W 70

Bulb temperature, °C 250

Warm up time, s 3

v1-0,15[55(2)00061.jpg
Averaged Anode Characteristic Curve:
U_f = 6.3V

v1-0,15[55(2)00062.jpg
Averaged Peak Characteristic Curve:
U_f = 6.3V

OPERATING ENVIRONMENTAL CONDITIONS
Vibration loads:
frequencies, Hz	5-600
acceleration, m/s²	75
Multiple impacts at impact duration up to 80 ms with acceleration, m/s²	735
Ambient temperature, °C	-60 to +100
Relative humidity at up to +40 °C, %	98

BASIC DATA Electrical Parameters
Filament voltage, V	6.3
Filament current, A	6.8-8.2
Anode current (at anode voltage 250 V), mA, at least	180
Peak emission current (at filament voltage 5.7 V, anode voltage 2 kV), mA, at least	700
Electrical parameters over 500 h of service:
peak emission current, mA, at least	700
anode current, mA, at least	150

Limit Operating Values
Filament voltage, V	5.7-6.9
Reverse voltage, kV:
at anode average current 150 mA	40
at anode average current 50 mA	50
Anode current, peak value, mA	700
Anode dissipation, W	70
Bulb temperature, °C	250
Warm up time, s	3