STC NavigatoR / High-Voltage High-Vacuum Rectifier Tubes / Tube v2-0,06/25

,Cathode Ray Tubes,Ceramic Tubes,CFA,chemical synthesis,chromenes,CO2 sensors,Communication,composite membranes,condensed heterocycles,Control Tubes,CWT,database,Devices,Diodes,Discharger,Display Tubes,Electron Tubes,Electron,antitumor,artificial organs,artificial skin,Attenuators,Audio tubes,Backward Wave Oscillator,Band filtering,Beam tubes,biocompatibility,biomaterials,biosensors,Broadcast,Broadcasting Tubes,Broadcasting,carbon dioxide isolation3CX300A1,4CX400A,4CX800A,4X150A,6360,6BK4,6BQ7.6C19,6C33C,6D22S,6N1P,6S19P,7034,813,829A,832A,833A,absorbent,Acquisition,Aircraft,Amateur Radio,Amateur,Amplifiers,Antenna amplifiers,anticancer compounds,antitumor agent,High-Voltage High-Vacuum Rectifier Tubes,High-Voltage,High-Vacuum,Rectifier,Russia,component,Navigator,product,characteristics,tube,technical,information,diagram">

V2-0,06/25

RECTIFIER TUBE

The B2-0,06/25 rectifier tube converts alternating voltage to direct voltage in rectifier circuits of RF equipment

GENERAL
Cathode: indirectly heated, oxide-coated.
Envelope: glass, no-base.
Height: at most 105 mm.
Diameter: at most 40.5 mm.
Mass: at most 150g

v2-0,06[25(1)00071.jpg

OPERATING ENVIRONMENTAL CONDITIONS

Vibration loads:

frequencies, Hz 5-1,000

acceleration, m/s² 75

Multiple impacts at impact duration up to 80 ms with acceleration, m/s² 1,470

Ambient temperature, °C -60 to +85

Relative humidity at up to +40 °C, % 98

BASIC DATA
Electrical Parameters

Heater voltage, V 5

Heater current, A 3.5-4.3

Anode current, A:

peak (at peak anode voltage 1.5 kV), at least 2.5

peak, over 750 h of service, at least 2.5

Limit Operating Values
Rectification

Heater voltage, V 4.5-5.5

Reserve voltage, kV 25

Anode current, mA:

average value 60

peak value 500

at the instant of switching on 4,000

Anode dissipation, W 25

Bulb temperature, °C 250

Warm up time, s, at least 45

Pulsed Operation

Cathode-heater voltage, V -150

Anode current, mA:

average vaue 50

peak value 5,000

Anode dissipation, W 33

Electric charge of pulse, A-µs 22

Pulse duration, µs 4

1/duty factor 500

Bulb temperature, °C 300

v2-0,06[25(2)00081.jpg
Averaged Peak Anode Characteristic Curve:
U_f = 5V

OPERATING ENVIRONMENTAL CONDITIONS
Vibration loads:
frequencies, Hz	5-1,000
acceleration, m/s²	75
Multiple impacts at impact duration up to 80 ms with acceleration, m/s²	1,470
Ambient temperature, °C	-60 to +85
Relative humidity at up to +40 °C, %	98

BASIC DATA Electrical Parameters
Heater voltage, V	5
Heater current, A	3.5-4.3
Anode current, A:
peak (at peak anode voltage 1.5 kV), at least	2.5
peak, over 750 h of service, at least	2.5

Limit Operating Values Rectification
Heater voltage, V	4.5-5.5
Reserve voltage, kV	25
Anode current, mA:
average value	60
peak value	500
at the instant of switching on	4,000
Anode dissipation, W	25
Bulb temperature, °C	250
Warm up time, s, at least	45

Pulsed Operation
Cathode-heater voltage, V	-150
Anode current, mA:
average vaue	50
peak value	5,000
Anode dissipation, W	33
Electric charge of pulse, A-µs	22
Pulse duration, µs	4
1/duty factor	500
Bulb temperature, °C	300